My Cart

Print Head Clean

If the Nozzle Check is not good, you will need to perform a Print Head Clean.

A Print Head Clean is performed from the Printer Control Panel under the Main menu. Press the
<MENU> button and select Print Head Clean and press <ENTER>. You will see the following menu of options.

If your nozzle check only shows that the white ink channels are not firing fully then select Clean White Channels and press <ENTER>, you will see the following menu.

You can then select to clean both of the white ink channels or only one of them. When the clean is completed select Exit and press <ENTER>.

If you need to clean any of the CMYK channels, select either Clean All Light or Clean All Heavy determined from the quality of the nozzle check and press <ENTER>. When the clean is completed select Exit and press <ENTER>.

You now need to perform another Nozzle Check to check the status of your print nozzles. If the check is still not good, repeat the Print Head Cleans until it is. If the Nozzle Check Pattern looks good then you are finished with the initial printer setup.

Still have questions or need help?